My Certificates - ZyXEL Communications NXC5200 User Manual

32.2 My Certificates

Click Configuration > Object > Certificate > My Certificates to open this
screen. This is the NXC's summary list of certificates and certification requests.
Figure 203 Configuration > Object > Certificate > My Certificates
The following table describes the labels in this screen.
Table 168 Configuration > Object > Certificate > My Certificates
LABEL
PKI Storage
Space in Use
Add
Edit
Remove
Object
References
#
Name
NXC5200 User's Guide
DESCRIPTION
This bar displays the percentage of the NXC's PKI storage space that is
currently in use. When the storage space is almost full, you should
consider deleting expired or unnecessary certificates before adding
more certificates.
Click this to go to the screen where you can have the NXC generate a
certificate or a certification request.
Double-click an entry or select it and click Edit to open a screen with an
in-depth list of information about the certificate.
The NXC keeps all of your certificates unless you specifically delete
them. Uploading a new firmware or default configuration file does not
delete your certificates. To remove an entry, select it and click Remove.
The NXC confirms you want to remove it before doing so. Subsequent
certificates move up by one when you take this action.
You cannot delete certificates that any of the NXC's features are
configured to use. Select an entry and click Object References to open
a screen that shows which settings use the entry.
This field displays the certificate index number. The certificates are
listed in alphabetical order.
This field displays the name used to identify this certificate. It is
recommended that you give each certificate a unique name.
Chapter 32 Certificates
445