ZyXEL Communications NXC5200 User Manual page 400

Chapter 25 AP Profile
25.3.3.1 Add/Edit MAC Filter Profile
This screen allows you to create a new MAC filtering profile or edit an existing one.
To access this screen, click the Add button or select a MAC filter profile from the
list and click the Edit button.
Figure 179 SSID > MAC Filter List > Add/Edit MAC Filter Profile
The following table describes the labels in this screen.
Table 147 SSID > MAC Filter List > Add/Edit MAC Filter Profile
LABEL
Profile Name
Filter Action
Add
Edit
Remove
#
MAC Address
Description
400
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name
is only visible in the Web Configurator and is only for management
purposes. Spaces and underscores are allowed.
Select allow to permit the wireless client with the MAC addresses in this
profile to connect to the network through the associated SSID; select
deny to block the wireless clients with the specified MAC addresses.
Click this to add a MAC address to the profile's list.
Click this to edit the selected MAC address in the profile's list.
Click this to remove the selected MAC address from the profile's list.
This field is a sequential value, and it is not associated with a specific
user.
This field specifies a MAC address associated with this profile.
This field displays a description for the MAC address associated with this
profile. You can click the description to make it editable. Enter up to 60
characters, spaces and underscores allowed.
NXC5200 User's Guide