Auth. Policy Add/Edit - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Table 85 Configuration > Captive Portal > Add Exceptional Services (continued)

17.2.2 Auth. Policy Add/Edit

This screen allows you to add authentication policies to captive portal interception.

Click the Add or Edit button (for an existing policy) in the Authentication Policy

Summary table on the Captive Portal screen to access this screen.

Figure 106 Configuration > Captive Portal > Auth. Policy Add/Edit

The following table describes the labels in this screen.

Table 86 Configuration > Captive Portal > Auth. Policy Add/Edit

Enable Policy

NXC5200 User's Guide

Click OK to save your changes back to the NXC.

Click Cancel to exit this screen without saving.

Select an object (SSID Profile, Address, or Service) from the list to create

a new one. You can then use the object with the authentication policy

rule. For example, if you create a new SSID Profile called 'CoffeeBar',

then you can select it immediately from the SSID Profile item in the

Add Authentication Services screen.

Select this to enable the new authentication policy. You can later edit the

authentication policy and deselect it if you want to disable it.

Enter an optional description of the authentication policy. You can enter

up to 60 characters.

Chapter 17 Captive Portal

Nxc5200 - v2.20