Edit Ethernet - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 11 Interfaces

11.2.1 Edit Ethernet

This screen lets you configure IP address assignment and interface parameters. To

access this screen, click an Edit icon in the Ethernet screen.

Note: If you create IP address objects based on an interface's IP address, subnet, or

gateway, the NXC automatically updates every rule or setting that uses the

object whenever the interface's IP address settings change. For example, if you

change LAN's IP address, the NXC automatically updates the corresponding

interface-based, LAN subnet address object.

Figure 75 Configuration > Network > Interface > Ethernet > Edit

This screen's fields are described in the table below.

Table 63 Configuration > Network > Interface > Ethernet > Edit

General Settings

Click this button to display a greater or lesser number of configuration

Select this to enable this interface. Clear this to disable this interface.

NXC5200 User's Guide

Nxc5200 - v2.20