ZyXEL Communications NXC5200 User Manual page 604

Appendix A Log Descriptions
Table 230 WLAN Logs (continued)
LOG MESSAGE
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message
Table 231 Account Logs
LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.
Table 232 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
604
DESCRIPTION
A wireless client used an incorrect WPA or WPA2 user name
or user password and failed authentication by the NXC's local
user database while trying to connect to the specified WLAN
interface (first %s). The MAC address of the wireless client is
listed (second %s).
There was an error when attempting to extract the EAP-
Message from a RADIUS message. The first %s is the WLAN
interface. The second %s is the MAC address of the wireless
client.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
Force user authentication will be turned on because HTTP
server was turned on.
Force user authentication will be turned off because HTTP
server was turned off.
NXC5200 User's Guide