Vlan Summary - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 11 Interfaces

• Between the router and VLAN 3.

11.3.1 VLAN Summary

This screen lists every VLAN interface. To access this screen, click Configuration

> Network > Interface > VLAN.

Figure 79 Configuration > Network > Interface > VLAN

Each field is explained in the following table.

Table 65 Configuration > Network > Interface > VLAN

Click this to create a new VLAN.

Double-click an entry or select it and click Edit to open a screen where you

can modify the entry's settings.

To remove an entry, select it and click Remove. The NXC confirms you want

to remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

Select an entry and click Object References to open a screen that shows

which settings use the entry.

This field is a sequential value, and it is not associated with any interface.

This icon is lit when the entry is active and dimmed when the entry is

This field displays the name of the interface.

This field displays the current IP address of the interface. If the IP address is

0.0.0.0, the interface does not have an IP address yet.

This screen also shows whether the IP address is a static IP address

(STATIC) or dynamically assigned (DHCP). IP addresses are always static

in virtual interfaces.

For VLAN interfaces, this field displays

the Ethernet interface on which the VLAN interface is created

For virtual interfaces, this field is blank.

This field indicates which zones the VLAN belongs to as a member.

NXC5200 User's Guide

Nxc5200 - v2.20