ZyXEL Communications NXC5200 User Manual page 610

Appendix A Log Descriptions
Table 238 CAPWAP Client Logs
LOG MESSAGE
STA Roaming.
MAC
Addr:%02x:%02x:%02x:
%02x:%02x:%02x,
From=%s, To=%s
STA List Full. STA List of
Managed AP [%s] is Full
Table 239 CAPWAP Data Forward Logs
LOG MESSAGE
after establish tunnel,
receive ioctl from capwap
(%s, %d, %d, %d, %d,
%d)
before destroy tunnel %s
, prepare to destroy vwp
dev
get tunnel dev failed
remove netdev (%s, %s,
%d, %d, %d, %d) from
vwp list!
610
DESCRIPTION
The specified station roamed from the first specified AP to the
other.
1st %02x~6th%02x: Station MAC Address.
7th %s: Source AP's description.
8th %s: Destination AP's description.
The number of stations connecting to the specified AP has
reached its upper limit.
1st %s: WTP's description.
DESCRIPTION
The NXC received an ioctl message after establishing a data
tunnel.
1st %s: tunnel name
1st %d: tunnel id
2nd %d: radio id
3rd %d: vap id
4th %d: vid
Before the NXC destroys an old data tunnel it destroys the
vwp dev first.
1st %s: tunnel name
Indicats that this particular action failed.
Indicates that this particular action failed.
1st %s: tunnel name
2nd %s: vwp net dev name
1st %d: tunnel id
2nd %d: radio id
3rd %d: vap id
4th %d: vid
NXC5200 User's Guide