Group Summary - ZyXEL Communications NXC5200 User Manual

Table 134 Configuration > User/Group > User > Add/Edit A User (continued)
LABEL
Reauthentication
Time
Configuration
Validation
OK
Cancel

24.3 Group Summary

User groups consist of access users and other user groups. You cannot put admin
users in user groups. The Group screen provides a summary of all user groups. In
addition, this screen allows you to add, edit, and remove user groups. To access
this screen, login to the Web Configurator, and click Configuration > Object >
User/Group > Group.
Figure 167 Configuration > Object > User/Group > Group
The following table describes the labels in this screen.
Table 135 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
Object
References
#
Group Name
NXC5200 User's Guide
DESCRIPTION
Type the number of minutes this user can be logged into the NXC in
one session before the user has to log in again. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew
the session without logging out.
Use a user account from the group specified above to test if the
configuration is correct. Enter the account's user name in the User
Name field and click Test.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so. Removing a group does not remove
the user accounts in the group.
Select an entry and click Object References to open a screen that
shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific
user group.
This field displays the name of each user group.
Chapter 24 User/Group
379