Service Group Summary - ZyXEL Communications NXC5200 User Manual

28.3 Service Group Summary

The Service Group summary screen provides a summary of all service groups. In
addition, this screen allows you to add, edit, and remove service groups.
To access this screen, log in to the Web Configurator, and click Configuration >
Object > Service > Service Group.
Figure 189 Configuration > Object > Service > Service Group
The following table describes the labels in this screen.
Table 156 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
Object
References
#
Name
Description
NXC5200 User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific
service group.
This field displays the name of each service group.
By default, the NXC uses services starting with "Default_Allow_" in the
firewall rules to allow certain services to connect to the NXC.
This field displays the description of each service group, if any.
Chapter 28 Services
417