Add/Edit Address - ZyXEL Communications NXC5200 User Manual

27.2.1 Add/Edit Address

The Add/Edit Address screen allows you to create a new address or edit an
existing one. To access this screen, go to the Address screen, and click either the
Add icon or an Edit icon.
Figure 184 Configuration > Object > Address > Address > Add/Edit
The following table describes the labels in this screen.
Table 151 Configuration > Object > Address > Address > Add/Edit
LABEL
Name
Address Type
IP Address
Starting IP
Address
Ending IP
Address
Network
Netmask
Interface
NXC5200 User's Guide
DESCRIPTION
Type the name used to refer to the address. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Select the type of address you want to create. Choices are: HOST,
RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and
INTERFACE GATEWAY.
Note: The NXC automatically updates address objects that are
based on an interface's IP address, subnet, or gateway if the
interface's IP address settings change. For example, if you
change ge1's IP address, the NXC automatically updates the
corresponding interface-based, LAN subnet address object.
This field is only available if the Address Type is HOST. This field
cannot be blank. Enter the IP address that this address object
represents.
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the beginning of the range of IP addresses that
this address object represents.
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the end of the range of IP address that this
address object represents.
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the IP address of the network that this
address object represents.
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the subnet mask of the network that
this address object represents. Use dotted decimal format.
If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE
GATEWAY as the Address Type, use this field to select the interface of
the network that this address object represents.
Chapter 27 Addresses
), or dashes (-), but the first
_
409