Chapter 1 Introduction; Overview; Rack-Mounted Installation - ZyXEL Communications NXC5200 User Manual

C
H A P T E R

1.1 Overview

The NXC is a comprehensive wireless LAN controller. Its flexible configuration
helps network administrators set up wireless LAN networks and efficiently enforce
security policies over them. In addition, the NXC provides excellent throughput,
making it an ideal solution for reliable, secure service.
The NXC's security features include firewall, anti-virus, Intrusion Detection and
Prevention (IDP), Anomaly Detection and Protection (ADP), and certificates. It
also provides bandwidth management, captive portal configuration, NAT, port
forwarding, policy routing, DHCP server, extensive wireless AP control options, and
many other powerful features. Flexible configuration helps you set up the network
and enforce security policies efficiently.
The front panel physical Gigabit Ethernet ports (labeled P1, P2, P3, and so on)
are mapped to Gigabit Ethernet (ge) interfaces. By default P1 is mapped to ge1,
P2 is mapped to ge2 and so on.
• The default LAN IP address is 192.168.1.1.
• The default administrator login user name and password are "admin" and
"1234" respectively.

1.2 Rack-mounted Installation

Note: ZyXEL provides a sliding rail accessory for your use with your device. Please
contact your local vendor for details.
The NXC can be mounted on an EIA standard size, 19-inch rack or in a wiring
closet with other equipment. Follow the steps below to mount your NXC on a
standard EIA rack using a rack-mounting kit. Make sure the rack will safely
support the combined weight of all the equipment it contains and that the position
of the NXC does not make the rack unstable or top-heavy. Take all necessary
precautions to anchor the rack securely before installing the unit.
Note: Leave 10 cm of clearance at the sides and 20 cm in the rear.
NXC5200 User's Guide
1
Introduction
25