Edit Ip/Mac Binding - ZyXEL Communications NXC5200 User Manual

The following table describes the labels in this screen.
Table 80 Configuration > Network > IP/MAC Binding > Summary
LABEL
Edit
Activate
Inactivate
#
Status
Interface
Number of
Binding
Apply

16.2.1 Edit IP/MAC Binding

Click Configuration > Network > IP/MAC Binding > Edit to open this screen.
Use this screen to configure an interface's IP to MAC address binding settings.
Figure 100 Configuration > Network > IP/MAC Binding > Edit
NXC5200 User's Guide
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific
entry.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This is the name of an interface that supports IP/MAC binding.
This field displays the interface's total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
Click Apply to save your changes back to the NXC.
Chapter 16 IP/MAC Binding
235