Add/Edit Session Limit - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Table 94 Configuration > Firewall > Session Limit (continued)

18.3.1 Add/Edit Session Limit

Click Configuration > Firewall > Session Limit and the Add or Edit icon to

display the Firewall Session Limit Edit screen. Use this screen to configure

rules that define a session limit for specific users or addresses.

Figure 116 Configuration > Firewall > Session Limit > Add/Edit

The following table describes the labels in this screen.

Table 95 Configuration > Firewall > Session Limit > Add/Edit

NXC5200 User's Guide

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

To change a rule's position in the numbered list, select the rule and click

Move to display a field to type a number for where you want to put that

rule and press [ENTER] to move the rule to the number that you typed.

The ordering of your rules is important as they are applied in order of

their numbering.

This icon is lit when the entry is active and dimmed when the entry is

This is the index number of a session limit rule. It is not associated with

a specific rule.

This is the user name or user group name to which this session limit rule

This is the address object to which this session limit rule applies.

This is how many concurrent sessions this user or address is allowed to

Click Apply to save your changes back to the NXC.

Click Reset to return the screen to its last-saved settings.

Use to configure any new settings objects that you need to use in this

Select this check box to turn on this session limit rule.

Chapter 18 Firewall

Nxc5200 - v2.20