Add/Edit Service Group Rule - ZyXEL Communications NXC5200 User Manual

Chapter 28 Services

28.3.1 Add/Edit Service Group Rule

The Add/Edit Service Group Rule screen allows you to create a new service
group or edit an existing one. To access this screen, go to the Service Group
screen and click either the Add icon or an Edit icon.
Figure 190 Configuration > Object > Service > Service Group > Add/Edit
The following table describes the labels in this screen.
Table 157 Configuration > Object > Service > Service Group > Add/Edit
LABEL
Name
Description
Member List
OK
Cancel
418
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60
printable ASCII characters.
The Member list displays the names of the service and service group
objects that have been added to the service group. The order of
members is not important.
Select items from the Available list that you want to be members and
move them to the Member list. You can double-click a single entry to
move it or use the [Shift] or [Ctrl] key to select multiple entries and use
the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
NXC5200 User's Guide