Ap Management - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

10.3 AP Management

Use this screen to manage all of the APs connected to the NXC. Click

Configuration > Wireless > AP Management to access this screen.

Figure 63 Configuration > Wireless > AP Management

Each field is described in the following table.

Table 56 Configuration > Wireless > AP Management

R1 Mode / Profile

NXC5200 User's Guide

Select an AP and click this button to edit its properties.

Select an AP and click this button to remove it from the list.

Note: If in the Configuration > Wireless > Controller screen

you set the Registration Type to Always Accept, then as

soon as you remove an AP from this list it reconnects.

Select an AP and click this button to force it to restart.

This field is a sequential value, and it is not associated with any

This field displays the IP address of the AP.

This field displays the MAC address of the AP.

This field displays the AP's hardware model information. It displays

"N/A" (not applicable) only when the AP disconnects from the NXC

and the information is unavailable as a result.

This field displays the AP or MON profile for Radio 1.

This field displays the AP's description, which you can configure by

selecting the AP and clicking the Edit button.

Chapter 10 Wireless

Nxc5200 - v2.20