33.4 Console Speed
This section shows you how to set the console port speed when you connect to the
NXC via the console port using a terminal emulation program. See
32
for default console port settings.
Click Configuration > System > Console Speed to open this screen.
Figure 213 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 178 Configuration > System > Console Speed
LABEL
Console Port
Speed
Apply
Reset
33.5 DNS Overview
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because
without it, you must know the IP address of a machine before you can access it.
33.5.1 DNS Server Address Assignment
The NXC can get the DNS server addresses in the following ways.
• The ISP tells you the DNS server addresses, usually in the form of an
information sheet, when you sign up. If your ISP gives you DNS server
addresses, manually enter them in the DNS server fields.
NXC5200 User's Guide
DESCRIPTION
Use the drop-down list box to change the speed of the console port.
Your NXC supports 9600, 19200, 38400, 57600, and 115200 bps
(default) for the console port.
The Console Port Speed applies to a console port connection using
terminal emulation software and NOT the Console in the NXC Web
Configurator Status screen.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 33 System
Table 2 on page
469