Shell Script - ZyXEL Communications NXC5200 User Manual

After you see the Firmware Upload in Process screen, wait two minutes before
logging into the NXC again.
Figure 245 Firmware Upload In Process
Note: The NXC automatically reboots after a successful upload.
The NXC automatically restarts causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 246 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the HOME
screen.
If the upload was not successful, the following message appears in the status bar
at the bottom of the screen.
Figure 247 Firmware Upload Error

35.4 Shell Script

Use shell script files to have the NXC use commands that you specify. Use a text
editor to create the shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open this screen. Use the
Shell Script screen to store, name, download, upload and run shell script files.
You can store multiple shell script files on the NXC at the same time.
NXC5200 User's Guide
Chapter 35 File Manager
527