Chapter 33 System
33.5.9 Add MX Record
Click the Add icon in the MX Record table to add a MX record.
Figure 217 Configuration > System > DNS > Add MX Record
The following table describes the labels in this screen.
Table 182 Configuration > System > DNS > Add MX Record
LABEL
Domain Name
IP Address/
FQDN
OK
Cancel
33.5.10 Add Service Control
Click the Add icon in the Service Control table to add a service control rule.
Figure 218 Configuration > System > DNS > Add Service Control Rule
The following table describes the labels in this screen.
Table 183 Configuration > System > DNS > Add Service Control Rule
LABEL
Create new
Object
Address
Object
476
DESCRIPTION
Enter the domain name where the mail is destined for.
Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail
server that handles the mail for the domain specified in the field above.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
DESCRIPTION
Use this to configure any new settings objects that you need to use in
this screen.
Select ALL to allow or deny any computer to send DNS queries to the
NXC.
Select a predefined address object to just allow or deny the computer
with the IP address that you specified to send DNS queries to the NXC.
NXC5200 User's Guide