Base Profiles - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 21 IDP

The following table describes the fields in this screen.

Table 113 Configuration > Anti-X > IDP > Profile

Base Profile

21.3.1 Base Profiles

The NXC comes with several base profiles. You use base profiles to create new

profiles. In the Configuration > Anti-X > IDP > Profile screen, click Add to

display the following screen.

Figure 138 Base Profiles

The following table describes this screen.

Table 114 Base Profiles

Click this to create a new entry.

Select an entry and click this to be able to modify it.

Select an entry and click this to delete it.

This is the entry's index number in the list.

This is the name of the profile you created.

This is the base profile from which the profile was created.

All signatures are disabled. No logs are generated nor actions are taken.

All signatures are enabled. Signatures with a high or severe severity

level (greater than three) generate log alerts and cause packets that

trigger them to be dropped. Signatures with a very low, low or medium

severity level (less than or equal to three) generate logs (not log alerts)

and no action is taken on packets that trigger them.

Signatures for all services are enabled. Signatures with a medium, high

or severe severity level (greater than two) generate logs (not log alerts)

and no action is taken on packets that trigger them. Signatures with a

very low or low severity level (less than or equal to two) are disabled.

NXC5200 User's Guide

Nxc5200 - v2.20