Configure The Aaa Object - ZyXEL Communications NXC5200 User Manual

Under Member Configuration, set the ge1 Member status to Yes and TX
4d
Tagging to Yes.
Scroll down to IP Address Assignment and select Use Fixed IP Address.
4e
IP Address, enter 10.10.102.254.
4f
Subnet Mask: Enter 255.255.255.0.
4g
Gateway: Enter 10.10.102.254.
4h
Click OK to save these changes.
5
After configuring VLANs 99, 101, and 102, the Configuration > Network >
Interfaces > VLAN screen should look similar to this:
Figure 21 Tutorial VLANs Summary
See Also:

5.2.4 Configure the AAA Object

This section shows you how to set up the AAA (Authentication, Authorization,
Accounting) server settings to allow registered users to log into the network
through the staff SSID.
Open the Configuration > Object > AAA Server > Active Directory screen
1
and then click the Add button.
NXC5200 User's Guide
Chapter 11 on page 177.
Chapter 5 Tutorials
77