Front Panel Leds; Management Overview - ZyXEL Communications NXC5200 User Manual

1.3.3 Front Panel LEDs

This section describes the front panel LEDs.
Figure 6 NXC Front Panel - Configuration 3
Ethernet
Link Status
The following table describes the LEDs.
Table 1 Front Panel LEDs
LED
POWER
STATUS
Ethernet Link
Ethernet
Status
Fiber Link

1.4 Management Overview

You can use the following ways to manage the NXC.
Web Configurator
The Web Configurator allows easy NXC setup and management using an Internet
browser. This User's Guide provides information about the Web Configurator.
NXC5200 User's Guide
COLOR STATUS DESCRIPTION
Off The power module is turned off, not receiving power,
or not functioning.
Green On The power module is operating.
Off The NXC is turned off.
Green On The NXC is ready and operating normally.
Flashing The NXC is self-testing.
Amber On The port has a connected RJ-45 cable.
Flashing The port is sending and receiving data.
Green On The port is functioning at 10/100M speed.
Amber On The port is functioning at 1000M speed.
Amber On The port has a connected fiber cable.
Chapter 1 Introduction
Fiber 5 / 6 Fiber 7 / 8
Link Link
31