Session Monitor - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 7 Monitor

Table 31 Monitor > System Status > Traffic Statistics (continued)

The following table displays the maximum number of records shown in the report,

the byte count limit, and the hit count limit.

Table 32 Maximum Values for Reports

Hit Count Limit 2

7.6 Session Monitor

This screen displays information about active sessions for debugging or statistical

analysis. It is not possible to manage sessions in this screen. The following

information is displayed.

• User who started the session

• Protocol or service port used

• Source address

• Destination address

• Number of bytes received (so far)

• Number of bytes transmitted (so far)

• Duration (so far)

You can look at all the active sessions by user, service, source IP address, or

destination IP address. You can also filter the information by user, protocol /

service or service group, source address, and/or destination address and view it

This field displays the domain names most often visited. The NXC counts

each page viewed on a Web site as another hit. The maximum number of

domain names in this report is indicated in

This field displays how many hits the Web site received. The NXC counts

hits by counting HTTP GET packets. Many Web sites have HTTP GET

references to other Web sites, and the NXC counts these as hits too. The

count starts over at zero if the number of hits passes the hit count limit.

Table 32 on page

bytes; this is just less than 17 million terabytes.

hits; this is over 1.8 x 10

Table 32 on page

NXC5200 User's Guide

Nxc5200 - v2.20