Add/Edit Static Dhcp Rule - ZyXEL Communications NXC5200 User Manual

16.2.2 Add/Edit Static DHCP Rule

Click Configuration > Network > IP/MAC Binding > Edit to open this screen.
Click the Add or Edit icon to open the following screen. Use this screen to
configure an interface's IP to MAC address binding settings.
Figure 101 Configuration > Network > IP/MAC Binding > Edit > Add/Edit
The following table describes the labels in this screen.
Table 82 Configuration > Network > IP/MAC Binding > Edit > Add/Edit
LABEL
Interface
Name
IP Address
MAC Address
Description
OK
Cancel
NXC5200 User's Guide
DESCRIPTION
This field displays the name of the interface within the NXC and the
interface's IP address and subnet mask.
Enter the IP address that the NXC is to assign to a device with the entry's
MAC address.
Enter the MAC address of the device to which the NXC assigns the entry's
IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer's owner.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
Chapter 16 IP/MAC Binding
237