Detected Device - ZyXEL Communications NXC5200 User Manual

Chapter 7 Monitor
The following table describes the labels in this screen.
Table 41 Monitor > Wireless > Station List
LABEL
#
MAC Address
Associated AP
SSID Name
Security Mode
Association
Time
Refresh

7.12 Detected Device

Use this screen to view the wireless devices passively detected by the NXC. Click
Monitor > Wireless > Rogue AP > Detected Device to access this screen.
Note: At least one of the APs connected to the NXC must be set to Monitor mode in
order to detect other wireless devices in its vicinity.
Figure 43 Monitor > Wireless > Rogue AP > Detected Device
The following table describes the labels in this screen.
Table 42 Monitor > Wireless > Rogue AP > Detected Device
LABEL
Mark as Rogue
AP
Mark as
Friendly AP
#
134
DESCRIPTION
This is the station's index number in this list.
This is the station's MAC address.
This indicates the AP through which the station is connected to the
network.
This indicates the name of the wireless network to which the station is
connected. A single AP can have multiple SSIDs or networks.
This indicates which secure encryption methods is being used by the
station to connect to the network.
This indicates how long the station has been associated with the AP.
Click this to refresh the items displayed on this page.
DESCRIPTION
Click this button to mark the selected AP as a rogue AP. A rogue AP can
be contained in the Configuration > Wireless > MON Mode screen
(Chapter 10 on page 163).
Click this button to mark the selected AP as a friendly AP. For more on
managing friendly APs, see the Configuration > Wireless > MON
Mode screen (Chapter 10 on page
This is the station's index number in this list.
163).
NXC5200 User's Guide