Chapter 27 Addresses
Table 151 Configuration > Object > Address > Address > Add/Edit (continued)
LABEL
OK
Cancel
27.3 Address Group Summary
The Address Group screen provides a summary of all address groups. To access
this screen, click Configuration > Object > Address > Address Group. Click a
column's heading cell to sort the table entries by that column's criteria. Click the
heading cell again to reverse the sort order.
Figure 185 Configuration > Object > Address > Address Group
The following table describes the labels in this screen.
Table 152 Configuration > Object > Address > Address Group
LABEL
Add
Edit
Remove
Object
References
#
Name
Description
410
DESCRIPTION
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific
address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
NXC5200 User's Guide