Wireless - ZyXEL Communications NXC5200 User Manual

My packet capture captured less than I wanted or failed.
The packet capture screen's File Size sets a maximum size limit for the total
combined size of all the capture files on the NXC, including any existing capture
files and any new capture files you generate. If you have existing capture files you
may need to set this size larger or delete existing capture files.
The NXC stops the capture and generates the capture file when either the capture
files reach the File Size or the time period specified in the Duration field expires.
My earlier packet capture files are missing.
New capture files overwrite existing files of the same name. Change the File
Suffix field's setting to avoid this.

39.1.2 Wireless

This section provides troubleshooting for wireless devices connected the NXC.
Wireless clients cannot connect to an AP.
• There may be a configuration mismatch between the AP and the NXC. This could
be the result of a number of things, such as incorrect VLAN topology, incorrect
AP profiles, incorrect security settings between the AP and the NXC, and so on.
See Chapter 5 on page 71
management.
• The wireless client's MAC address may be on the MAC filtering list. See
25.3.3 on page 399
• The wireless client may not be able to get an IP:
If the NXC is operating in bridge mode, check the settings on the DHCP server
associated with the network.
Check the wireless client's own network configuration settings to ensure that it
is set up to receive its IP address automatically.
If the NXC or a connected Internet access device are managing the network
with static IPs, make sure that the server settings for issuing those IPs are
properly configured.
Check the wireless client's own network settings to ensure it is already set up
with its static IP address.
NXC5200 User's Guide
for a simple primer on basic network topology and
for details on managing the NXC MAC Filter.
Chapter 39 Troubleshooting
Section
555