Object References - ZyXEL Communications NXC5200 User Manual

Table 63 Configuration > Network > Interface > Ethernet > Edit (continued)
LABEL
Use Default
MAC Address
Overwrite
Default MAC
Address
Related Setting
Configure
Policy Route
OK
Cancel

11.2.2 Object References

When a configuration screen includes an Object References icon, select a
configuration object and click Object References to open the Object
References screen. This screen displays which configuration settings reference
the selected object. The fields shown vary with the type of object.
Figure 76 Object References
NXC5200 User's Guide
DESCRIPTION
Select this option to have the interface use the factory assigned
default MAC address. By default, the NXC uses the factory assigned
MAC address to identify itself.
Select this option to have the interface use a different MAC address.
Either enter the MAC address in the fields or click Clone by host and
enter the IP address of the device or computer whose MAC you are
cloning. Once it is successfully configured, the address will be copied
to the configuration file. It will not change unless you change the
setting or upload a different configuration file.
Click Policy Route to go to the policy route summary screen where
you can manually associate traffic with this interface.
You must manually configure a policy route to add routing and SNAT
settings for an interface with the Interface Type set to General. You
can also configure a policy route to override the default routing and
SNAT behavior for an interface with the Interface Type set to
Internal or External.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
Chapter 11 Interfaces
185