Configuring Www Service Control - ZyXEL Communications NXC5200 User Manual

HTTP connection requests from a web browser go to port 80 (by default) on the
2
NXC's web server.
Figure 220 HTTP/HTTPS Implementation
Note: If you disable HTTP in the WWW screen, then the NXC blocks all HTTP
connection attempts.

33.6.4 Configuring WWW Service Control

Click Configuration > System > WWW to open the WWW screen. Use this
screen to specify from which zones you can access the NXC using HTTP or HTTPS.
You can also specify which IP addresses the access can come from.
Note: Admin Service Control deals with management access (to the Web
Configurator).
User Service Control deals with user access to the NXC.
NXC5200 User's Guide
Chapter 33 System
479