Packet Capture - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 36 Diagnostics

The following table describes the labels in this screen.

Table 201 Maintenance > Diagnostics

Last modified

36.3 Packet Capture

Use this screen to capture network traffic going through the NXC's interfaces.

Studying these packet captures may help you identify network problems.

Click Maintenance > Diagnostics > Packet Capture to open the packet

capture screen.

Note: New capture files overwrite existing files of the same name. Change the File

Suffix field's setting to avoid this.

Figure 250 Maintenance > Diagnostics > Packet Capture > Capture

This is the name of the most recently created diagnostic file.

This is the date and time that the last diagnostic file was created.

The format is yyyy-mm-dd hh:mm:ss.

This is the size of the most recently created diagnostic file.

Click this to have the NXC create a new diagnostic file.

Click this to save the most recent diagnostic file to a computer.

NXC5200 User's Guide

Nxc5200 - v2.20