Static Route - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 12 Policy and Static Routes

12.3 Static Route

Click Configuration > Network > Routing > Static Route to open the Static

Route screen. This screen displays the configured static routes.

Figure 83 Configuration > Network > Routing > Static Route

The following table describes the labels in this screen.

Table 71 Configuration > Network > Routing > Static Route

Click this to create a new static route.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove an entry, select it and click Remove. The NXC confirms you

want to remove it before doing so.

This is the number of an individual static route.

This is the destination IP address.

This is the IP subnet mask.

This is the IP address of the next-hop gateway or the interface through

which the traffic is routed. The gateway is a router or switch on the same

segment as your NXC's interface(s). The gateway helps forward packets

to their destinations.

This is the route's priority among the NXC's routes. The smaller the

number, the higher priority the route has.

NXC5200 User's Guide

Nxc5200 - v2.20