Port Statistics - ZyXEL Communications NXC5200 User Manual

7.3 Port Statistics

Use this screen to look at packet statistics for each Gigabit Ethernet port. To
access this screen, click Monitor > System Status > Port Statistics.
Figure 31 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 28 Monitor > System Status > Port Statistics
LABEL
Poll Interval
Set Interval
Stop
Switch to
Graphic View
#
Port
Status
TxPkts
RxPkts
Collisions
NXC5200 User's Guide
DESCRIPTION
Enter how often you want this window to be updated automatically, and
click Set Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start
it again by setting the Poll Interval and clicking Set Interval.
Click this to display the port statistics as a line graph.
This field displays the port's number in the list.
This field displays the physical port number.
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the
port speed and duplex setting (Full or Half).
This field displays the number of packets transmitted from the NXC on
the physical port since it was last connected.
This field displays the number of packets received by the NXC on the
physical port since it was last connected.
This field displays the number of collisions on the physical port since it
was last connected.
Chapter 7 Monitor
117