Add/Edit Address Group Rule - ZyXEL Communications NXC5200 User Manual

27.3.1 Add/Edit Address Group Rule

The Add/Edit Address Group Rule screen allows you to create a new address
group or edit an existing one. To access this screen, go to the Address Group
screen and click either the Add icon or an Edit icon.
Figure 186 Configuration > Object > Address > Address Group > Add/Edit
The following table describes the labels in this screen.
Table 153 Configuration > Object > Address > Address Group > Add/Edit
LABEL
Name
Description
Member List
OK
Cancel
NXC5200 User's Guide
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
This field displays the description of each address group, if any. You can
use up to 60 characters, punctuation marks, and spaces.
The Member list displays the names of the address and address group
objects that have been added to the address group. The order of
members is not important.
Select items from the Available list that you want to be members and
move them to the Member list. You can double-click a single entry to
move it or use the [Shift] or [Ctrl] key to select multiple entries and use
the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
Chapter 27 Addresses
411