Nat Summary - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 14 NAT

14.2 NAT Summary

The NAT summary screen provides a summary of all NAT rules and their

configuration. In addition, this screen allows you to create new NAT rules and edit

and delete existing NAT rules. To access this screen, login to the Web Configurator

and click Configuration > Network > NAT. The following screen appears,

providing a summary of the existing NAT rules.

Figure 90 Configuration > Network > NAT

The following table describes the labels in this screen.

Table 77 Configuration > Network > NAT

Mapping Type

Click this to create a new entry.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove an entry, select it and click Remove. The NXC confirms you

want to remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

This field is a sequential value, and it is not associated with a specific

This icon is lit when the entry is active and dimmed when the entry is

This field displays the name of the entry.

This field displays what kind of NAT this entry performs: Virtual Server,

1:1 NAT, or Many 1:1 NAT.

This field displays the interface on which packets for the NAT entry are

This field displays the original destination IP address (or address object)

of traffic that matches this NAT entry. It displays any if there is no

restriction on the original destination IP address.

This field displays the new destination IP address for the packet.

This field displays the service used by the packets for this NAT entry. It

displays any if there is no restriction on the services.

NXC5200 User's Guide

Nxc5200 - v2.20