ZyXEL Communications NXC5200 User Manual page 305

Hide thumbs Also See for NXC5200:

Table of Contents

If you try to enable IDP when the IDP service has not yet been registered, a

warning screen displays and IDP is not enabled.

Figure 136 Configuration > Anti-X > IDP > General

The following table describes the screens in this screen.

Table 112 Configuration > Anti-X > IDP > General

General Settings

NXC5200 User's Guide

You must register for IDP service in order to use packet inspection

signatures. If you don't have a standard license, you can register for

a once-off trial one.

Use this list to specify which IDP profile the NXC uses for traffic

flowing in a specific direction. Edit the policies directly in the table.

Click this to create a new entry. Select an entry and click Add to

create a new entry after the selected entry.

Select an entry and click this to be able to modify it.

Select an entry and click this to delete it.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

To change an entry's position in the numbered list, select it and click

Move to display a field to type a number for where you want to put

that entry and press [ENTER] to move the entry to the number that

Chapter 21 IDP

Troubleshooting

Nxc5200 - v2.20