Idp; Adp; Device Ha; Objects - ZyXEL Communications NXC5200 User Manual

Chapter 4 Configuration Basics

4.4.15 IDP

Use IDP to detect and take action on malicious or suspicious packets. You must
subscribe to use IDP. You can subscribe using the Licensing > Registration
screens or one of the wizards.
MENU ITEM(S)
PREREQUISITES

4.4.16 ADP

Use ADP to detect and take action on traffic and protocol anomalies.
MENU ITEM(S)
PREREQUISITES

4.4.17 Device HA

To increase network reliability, device HA lets a backup NXC automatically take
over if a master NXC fails.
MENU ITEM(S)
PREREQUISITES

4.5 Objects

Objects store information and are referenced by other features. If you update this
information in response to changes, the NXC automatically propagates the change
through the features that use the object. Select an object (such as a user group,
address, address group, service, service group, zone, or schedule) and then click
Object Reference at the top of the list box where the object appears in order to
display basic information about it.
The following table introduces the objects. You can also use this table when you
want to delete an object because you have to delete references to the object first.
Table 14 Objects Overview
OBJECT
user/group
ap profile
mon profile
66
Configuration > Anti-X > IDP
Registration, zones
Configuration > Anti-X > ADP
Zones
Configuration > Device HA
Interfaces (with a static IP address), to-NXC firewall
WHERE USED
See the User/Group section on page 67
See the AP Profile section on page 67
See the MON Profile section on page 68
for details.
for details.
for details.
NXC5200 User's Guide