Zone - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

13.2 Zone

The Zone screen provides a summary of all zones. In addition, this screen allows

you to add, edit, and remove zones. To access this screen, click Configuration >

Network > Zone.

Figure 87 Configuration > Network > Zone

The following table describes the labels in this screen.

Table 75 Configuration > Network > Zone

Block Intra-

NXC5200 User's Guide

Click this to create a new, user-configured zone.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove a user-configured zone, select it and click Remove. The NXC

confirms you want to remove it before doing so.

Select an entry and click Object References to open a screen that

shows which settings use the entry.

This field is a sequential value, and it is not associated with any

This field displays the name of the zone.

This field indicates whether or not the NXC blocks network traffic

between members in the zone.

This field displays the names of the interfaces that belong to each zone.

Chapter 13 Zones

Nxc5200 - v2.20