Radio List - ZyXEL Communications NXC5200 User Manual

The following table describes the labels in this screen.
Table 38 Monitor > System Status > AP List > Station Count of AP
LABEL
Station Count
Time
Last Update

7.10 Radio List

Use this screen to view statistics about the wireless radio transmitters in each of
the APs connected to the NXC. To access this screen, click Monitor > Wireless >
AP Info > Radio List.
Figure 40 Monitor > Wireless > AP Info > Radio List
The following table describes the labels in this screen.
Table 39 Monitor > Wireless > AP Info > Radio List
LABEL
More
Information
#
AP Description
Model
MAC Address
Radio
OP Mode
Profile
Frequency
Channel ID
Rx PKT
Tx PKT
NXC5200 User's Guide
DESCRIPTION
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
This field displays the date and time the information in the window was
last updated.
DESCRIPTION
Click this to view additional information about the selected radio's
wireless traffic. Information spans a 24 hour period.
This is the radio's index number in this list.
This displays the description of the AP to which the radio belongs.
This displays the model of the AP to which the radio belongs.
This displays the MAC address of the radio.
This indicates the radio number on the AP to which it belongs.
This indicates the radio's operating mode. Operating modes are AP
(access point) or MON (monitor).
This indicates the profile name to which the radio belongs.
This indicates the wireless frequency currently being used by the radio.
This indicates the radio's channel ID.
This displays the total number of packets received by the radio.
This displays the total number of packets transmitted by the radio.
Chapter 7 Monitor
131