Add/Edit Firewall Screen - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 18 Firewall

Table 92 Configuration > Firewall (continued)

18.2.1 Add/Edit Firewall Screen

In the Firewall screen, click the Edit or Add icon to display this screen.

Figure 114 Configuration > Firewall > Add/Edit

The following table describes the labels in this screen.

Table 93 Configuration > Firewall > Add/Edit

This displays the service object to which this firewall rule applies.

This field displays whether the firewall silently discards packets (deny),

discards packets and sends a TCP reset packet to the sender (reject) or

permits the passage of packets (allow).

This field shows you whether a log (and alert) is created when packets

match this rule or not.

Click Apply to save your changes back to the NXC.

Click Reset to return the screen to its last-saved settings.

Use to configure any new settings objects that you need to use in this

Select this check box to activate the firewall rule.

For through-NXC rules, select the direction of travel of packets to which

the rule applies.

any means all interfaces.

NXC means packets destined for the NXC itself.

Enter a descriptive name of up to 60 printable ASCII characters for the

firewall rule. Spaces are allowed.

NXC5200 User's Guide

Nxc5200 - v2.20