Application Patrol: Protocol Statistics By Rule - ZyXEL Communications NXC5200 User Manual

Chapter 7 Monitor
Table 44 Monitor > AppPatrol Statistics: Protocol Statistics (continued)
LABEL
Matched Auto
Connection
Matched
Service Ports
Connection

7.13.4 Application Patrol: Protocol Statistics by Rule

The bottom of the Monitor > AppPatrol Statistics screen displays statistics for
each of the selected protocols. Click a service's name to display this screen with
statistics for each of the service's application patrol rules.
Figure 47 Monitor > AppPatrol Statistics > Service
The following table describes the labels in this screen.
Table 45 Monitor > AppPatrol Statistics > Service
LABEL
Service Name
Rule Statistics
#
Inbound Kbps
Outbound
Kbps
Forwarded
Data (KB)
138
DESCRIPTION
This is how much of the application's traffic the NXC identified by
examining the IP payload.
This is how much of the application's traffic the NXC identified by
examining OSI level-3 information such as IP addresses and port
numbers.
DESCRIPTION
This is the application.
This table displays the statistics for each of the service's application
patrol rules.
This field is a sequential value, and it is not associated with a specific
rule.
This is the incoming bandwidth usage for traffic that matched this
protocol rule, in kilobits per second. This is the protocol's traffic that the
NXC sends to the initiator of the connection. So for a connection initiated
from the LAN to the WAN, the traffic sent from the WAN to the LAN is the
inbound traffic.
This is the outgoing bandwidth usage for traffic that matched this
protocol rule, in kilobits per second. This is the protocol's traffic that the
NXC sends out from the initiator of the connection. So for a connection
initiated from the LAN to the WAN, the traffic sent from the LAN to the
WAN is the outbound traffic.
This is how much of the application's traffic the NXC has sent (in
kilobytes).
NXC5200 User's Guide