Policy Types - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:
Table of Contents

Advertisement

Chapter 21 IDP
Table 115 Configuration > Anti-X > IDP > Profile > Add/Edit Profile (continued)
LABEL
Log
Action
OK
Cancel
Save

21.5.1 Policy Types

This section describes IDP policy types, also known as attack types, as categorized
in the NXC. You may refer to these types when categorizing your own custom
rules.
Table 116 Policy Types
POLICY TYPE
P2P
IM
SPAM
DoS/DDoS
314
DESCRIPTION
These are the log options. To edit this, select an item and use the Log
icon.
This is the action the NXC should take when a packet matches a signature
here. To edit this, select an item and use the Action icon.
A profile consists of three separate screens. If you want to configure just
one screen for an IDP profile, click OK to save your settings to the NXC,
complete the profile and return to the profile summary page.
Click Cancel to return to the profile summary page without saving any
changes.
If you want to configure more than one screen for an IDP profile, click
Save to save the configuration to the NXC, but remain in the same page.
You may then go to another profile screen (tab) in order to complete the
profile. Click OK in the final profile screen to complete the profile.
DESCRIPTION
Peer-to-peer (P2P) is where computing devices link directly to each
other and can directly initiate communication with each other; they
do not need an intermediary. A device can be both the client and the
server. In the NXC, P2P refers to peer-to-peer applications such as e-
Mule, e-Donkey, BitTorrent, iMesh, etc.
IM (Instant Messenger) refers to chat applications. Chat is real-time,
text-based communication between two or more users via networks-
connected computers. After you enter a chat (or chat room), any
room member can type a message that will appear on the monitors of
all the other participants.
Spam is unsolicited "junk" e-mail sent to large numbers of people to
promote products or services.
The goal of Denial of Service (DoS) attacks is not to steal
information, but to disable a device or network on the Internet.
A Distributed Denial of Service (DDoS) attack is one in which multiple
compromised systems attack a single target, thereby causing denial
of service for users of the targeted system.
NXC5200 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nxc5200 - v2.20

Table of Contents