Profile Summary - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 22 ADP

Table 123 Configuration > Anti-X > ADP > General (continued)

Anomaly Profile

22.3 Profile Summary

Use this screen to:

• Create a new profile using an existing base profile

• Edit an existing profile

• Delete an existing profile

This is the direction of travel of packets to which an anomaly profile

is bound. Traffic direction is defined by the zone the traffic is coming

from and the zone the traffic is going to.

Use the From field to specify the zone from which the traffic is

coming. Select NXC to specify traffic coming from the NXC itself.

Use the To field to specify the zone to which the traffic is going.

Select NXC to specify traffic destined for the NXC itself.

From LAN1 To LAN1 means packets traveling from a computer on

one LAN1 subnet to a computer on another LAN1 subnet via the

NXC's LAN1 zone interfaces. The NXC does not check packets

traveling from a LAN1 computer to another LAN1 computer on the

same subnet.

From WAN To WAN means packets that come in from the WAN

zone and the NXC routes back out through the WAN zone.

Note: Depending on your network topology and traffic load,

applying every packet direction to an anomaly profile may

affect the NXC's performance.

An anomaly profile is a set of anomaly rules with configured

activation, log and action settings. This field shows which anomaly

profile is bound to which traffic direction. Select an ADP profile to

apply to the entry's traffic direction. Configure the ADP profiles in the

ADP profile screens.

Click Apply to save your changes.

Click Reset to return the screen to its last-saved settings.

NXC5200 User's Guide

Nxc5200 - v2.20