Settings You Can Change with User Tools
Reference
To access User Tools, see p.50 "Accessing User Tools (System Settings)".
General Features
v Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
r Default: ON
v Warm Up Notice (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
Note
r If the Panel Tone setting is "OFF", the beeper does not sound, whatever the
Warm Up Notice setting.
r Default: ON
v Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Note
r Default: Up (count up)
v Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
Note
r Default: Copier
v Print Priority
Gives print priority to the mode displayed.
Reference
p.29 "Multi-Access"
Note
r Default: Display mode
r When [Interleave] is selected, the current print job will be interrupted after
a maximum of five sheets.
Settings You Can Change with User Tools
4
51