Key Operator Setting
E
Press [ON].
Note
r If there is an End Receiver al-
ready programmed, a receiver
name is shown. If you want to
change the receiver, press [Re-
ceiver] and proceed to step
r To cancel Forwarding, press
[Cancel] and proceed to step
F
Specify an End Receiver using the
destination list, and then press
[OK].
9
The receiver name is shown to the
right of [Receiver].
Note
r Pressing
tination between fax number
and e-mail address.
G
Press [OK].
H
Press the {User Tools/Counter} key.
The standby display appears.
156
F
.
H
.
to switch the des-
Quitting the forwarding function
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Forwarding].
E
Press [OFF], and then press [OK].
F
Press the {User Tools/Counter} key.
The standby display appears.