Ricoh Aficio 2045e General Settings Manual page 814

Preparing to Print
Note
NetBEUI cannot be used
under Windows XP.
Machines that respond to
a broadcast from the com-
puter will be displayed.
To print to a machine not
2
listed here, click [Specify
Address], and then enter
t h e N e t B E U I a d d r e s s .
Confirm the NetBEUI ad-
dress on the network is on
the configuration page.
F o r m o r e i n f o r m a t i o n
about printing the config-
uration page, see "Printer
Features Parameters",
Printer Reference 2. The
NetBEUI address appears
as "\\RNPxxxx\xxx" on
the configuration page.
Enter the machine's net-
work path name in the
form of "%%Computer
name\Share name". Do
not enter "\\" but "%%" as
head characters.
You cannot print to ma-
chines beyond routers.
IPP
A Click [IPP].
The IPP setting dialog box
appears.
B
To specify the IP address
o f t h e m a c h i n e , e n t e r
"http://machine's-ip-ad-
dress/printer" or "ipp://
machine's-ip-address/
printer" in the [Printer URL]
box.
(Example: IP address is
192.168.15.16)
http://192.168.15.16/
printer
ipp://192.168.15.16/
printer
20
C
If necessary, enter the
names to distinguish the
machine in the [IPP Port
Name] box. Enter a differ-
ent name to those of any
existing port name.
If you do not do this, the
a d d r e s s e n t e r d i n t h e
[Printer URL] box will be set
as the IPP port name.
D If a proxy server and IPP
user name are used, click
[Detailed Settings], and then
configure the necessary
settings.
Note
For more information
about these settings, see
SmartNetMonitor for Cli-
ent Help.
E Click [OK].
J
Make sure the location for the se-
lected machine appears after
[Port:].
K
Configure the user code and de-
fault printer as necessary.
User Code
User codes are eight digit codes
that allow you to keep track of
printing done under each code.
To use this feature, the network
administrator should assign
user codes and inform users of
them before they install the
printer driver.
Use the following methods to
enter a user code for registra-
tion:
• For the PCL 6/5e or Post-
Script 3 printer drivers, enter
the user code on the [Statis-
tics] tab in the printer proper-
ties dialog box.