B
Press [Specifd. Ratio].
C
Make sure that [Specifd. Ratio] is
highlighted.
D
Enter the length of the original
with the number keys, and then
press the [#] key.
Note
r You can enter sizes within the
following ranges:
Metric
1–999 mm (in increments of
ver-
1 mm)
sion
Inch
0.1"–99.9" (in increments of
ver-
0.1")
sion
E
Enter the length of the copy with
the number keys, and then press
[#].
Note
r To change the length after
pressing [#], select [Original] or
[Copy] and enter the desired
length.
F
Press [OK].
G
Press [OK].
H
Place your originals, and then
press the {Start} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
1.
Horizontal ratio
2.
Vertical ratio
Note
r You can also select a preset ratio
close to the desired ratio using [Re-
duce] or [Enlarge], then adjust with
[n] or [o].
A
Press [Reduce/Enlarge].
B
Press [Specifd. Ratio].
C
Press [Direct. Mag.%].
To enter the ratio with the number
keys
A Press [Horizontal].
B Enter the desired ratio with the
number keys, followed by [#].
Copier Functions
2
CP2P01EE
29