Ricoh Aficio 2045e General Settings Manual page 643

Original Original position
p.79 "Transmission with Image
Rotation"
r This function is only available with
Memory Transmission.
r This function is only available with
the ADF.
r You can confirm whether both
sides were properly scanned using
the Stamp function. See p.72
"Stamp".
r You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps B and C.
A
Place the original in the ADF, and
then select the scan settings you
require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.33 "Scan Settings", Facsimile
Reference <Basic Features>
B
Press [Sub TX Mode].
Page opening orinentation Output at the other end
Top to Top
Top to Bottom
Top to Top
Top to Bottom
GHPY030E
C
Press [2 Sided Original].
D
Specify the original position.
Check the orientation of the placed
document, and then press
.
Note
r Make sure that the specified
original position matches the
orientation of originals loaded
in the ADF.
E
Specify the page opening orienta-
tion from [Top to Top] or [Top to Bot-
tom].
F
Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page], and then press
[OK].
Sub Transmission Mode
or
4
63