Ricoh Aficio 2045e General Settings Manual page 422

Copying
Note
r The slip sheets should be the same
size and orientation as the copy pa-
per.
r You cannot place the copy paper in
the bypass tray.
r You can specify the pages up to 20.
2
A
Press [Cover/Slip Sheet].
B
Press [Desig./Chapter].
C
Press the key to select the chapter
number.
D
Enter the page number of the
original's location you want to
copy onto a slip sheet with the
number keys, and then press the
{#} key.
E
Select the paper tray for slip
sheets.
F
To specify another page location,
repeat steps C to E.
Note
r To select chapters 11 to 20, press
the [T11∼20] key.
G
When page designation is com-
plete, press [OK].
H
Press [OK].
I
Select the paper tray that contains
the sheet paper to copy the origi-
nals.
J
Place your originals in the ADF,
and then press the {Start} key.
70
Chapter
The page locations you specify with
this function will appear on the front
of copy sheets.
Preparation
Before selecting this function,
press [Dup./Combine/Series] and se-
lect Duplex (1 Sided→2 Sided)
mode or Combine mode.
Note
r This function can be used only
w h e n y o u u s e t h e D u p le x (1
Sided→2 Sided) or Combine func-
tion.
r You can specify the pages up to 20.
A
Press [Cover/Slip Sheet].
B
Press [Desig./Chapter].
C
Press [Chapter].
D
Press the key to select the chapter
number.
E
Enter the page location of the first
page of the first chapter with the
number keys, and then press the
{#} key.
F
To specify another page location,
repeat steps D to E.
Note
r To select chapters 11 to 20, press
the [T11-20] key.