Ricoh Aficio 2045e General Settings Manual page 779

Ricoh aficio 2045e: user guide

Hide thumbs Also See for Aficio 2045e:

Table of Contents

r There may be a difference in the size of the image when it is printed at the des-

r If you place an original larger than A3, 11"×17" on the exposure glass, only an

A3, 11"×17" area is scanned.

r Even if an original is correctly placed on the exposure glass or in the ADF, a

margin of 3 mm (0.1") around each edge of the original may not be sent.

r If the receiver uses paper of a smaller width than the original, the image will

be reduced to fit that paper. See p.74 "Auto Reduce".

r The machine detects paper sizes in the following ways:

• When you place an original in the ADF, an original wider than about 264

mm (10.4") is scanned as A3, 11"×17" size.

An original narrower than about 230 mm (9.1") will be sent as 8

"×14" size, and an original narrower than about 264 mm (10.4") is

scanned as B4 JIS.

Originals up to 1,200 mm (47.2") in length can be scanned.

• Refer to the table below for sizes the machine can detect when you place

an original on the exposure glass. Because the machine scans non-standard

size documents in a standard size, part of the image may be truncated de-

pending on the length of the document. For details about how to set non-

standard size documents, see p.18 "Setting a Scan Area", Facsimile Refer-

ence <Basic Features>.

v Metric Version

v Inch Version

× - Unable to auto detect

Normally a length of about 420 mm (16.5") can be scanned; however, it is only possi-

ble to specify a scanning size up to 432 mm (17").

249 mm-274 mm 274 mm-316 mm

Specifications

Show Quick Links

Chapters

Table of Contents