Ricoh Aficio 2045e General Settings Manual page 296

Appendix
❖ ❖ ❖ ❖ Setting timeout
You can specify the timeout inter-
val in use when receiving data
from the network.
msh> diprint [30~65535]
Note
❒ The default is 300 seconds.
❒ If 0 is set, timeout is disabled.
❖ ❖ ❖ ❖ Bidirectional configuration for the di-
rect printing port
Use this setting to configure
whether the direct printing port is
bidirectional or not. The default is
"off".
msh> diprint bidirect {on
| off}
Note
❒ If you select [on], SmartNet-
Monitor for Client or Standard
T C P / I P o n W i n d o w s 2 0 0 0
might not work correctly.
SMB
Use the "smb" command to configure
or delete the NetBEUI settings such as
the computer name or workgroup
9
name.
msh> smb parameter
Parameter
comp
group
comment
clear comp
clear group
clear com-
ment
96
Settings
Your computer name consist-
ing of up to 15 characters
Workgroup name consisting
of up to 15 characters
Comment consisting of up to
31 characters
Clears the computer name
Clears the Workgroup name
Clears comment
Note
❒ You cannot use a computer name
starting with "RNP" or "rnp".
ROUTE
Use the "route" command to control
the routing table.
This command allows you to config-
ure and display routing information.
You can change the network configu-
ration from remote computers using
this command.
Note
❒ The maximum number of routing
tables is 16.
Commands Topics of setting
route add Adds a host/network route
{host | net} to "destination", and a gate-
destination way address to "gateway" in
*1
gateway the table. Host becomes the
*1
default.
route de- Deletes a host/network route
lete {host | from the table. Host becomes
net} desti- the default.
*1
nation
route get Displays only route informa-
{destina- tion corresponding to a spec-
*1
tion } ified destination. When the
destination is unspecified, all
routing information is dis-
played.
route active You can turn the specified
{host | net} destination on or off. Host be-
destination comes the default.
*1
on/off
route add You can set the default gate-
default way address.
*1
gateway
route flush Deletes all routing informa-
tion.
*1
IP address