Form Feed; Print Using A Selected Tray - Ricoh Aficio 2045e General Settings Manual

Form Feed

This section gives instructions for op-
erating the machine when there is no
tray for the selected paper size or
type, or when paper loaded in the
machine has run out.
Limitation
The tray cannot be changed if the
following functions are set for it:
• Staple
• Punch
• Duplex Print to a tray that does
not support duplex printing
• Cover Sheet
• Front/Back Covers
• Slip Sheets
• Chaptering
Note
If form feed is selected for a tray
with the following settings, you
can change the tray by canceling
the settings:
• Staple
• Punch
If Auto Continue is selected, form
fed paper is printed after a set in-
terval. See p.42 "System".
If the machine does not have a tray for
the selected paper size or paper type,
or if the selected paper loaded in the
machine has run out, a caution mes-
sage appears.
If this message appears, do one of the
following:

Print Using a Selected Tray

A
Select the tray for form feed from
those that appear on the display
panel.
If you want to print after adding
paper to the tray, select the tray af-
ter loading the correct paper.
Note
To load paper in the bypass
tray, see "Setting Paper on the
Bypass Tray", Printer Reference
1.
B
Press [Continue].
The machine prints using the se-
lected tray.
Note
If a tray with a smaller paper
size is selected, the print job
may be cut short, or other prob-
lems may occur.
Form Feed
3
21